Triax TMM
TR-307311
Triax TMM 5x32 cascade multiswitch, to provide one satellite & terrestrial signal for up to 32 points. Also has satellite & terrestrial outputs to cascade on to another multiswitch. Diplex ...
TR-300305
Triax TMM 44 amplifier, for amplifiying a Quattro satellite feed, for long cable runs or for re-amplifying signals between cascade multiswitches. Note, this amplifier has no terrestrial leg....
TR-300308
Triax TMM PSI power inserter, for providing power to TMM multiswitches via the coaxial inputs. Can be located remotely....
TR-300310
Triax TMM 55 PSU , for providing power from a mains source to feed a maximum of 6 mumtiswitches (TMM DC link lead required to power more than one multiswitch....
TR-300312
Triax TMM 5x12 cascade multiswitch, to provide one satellite & terrestrial signal for up to 12 points. Also has satellite & terrestrial outputs to cascade on to another multiswitch. Diplex wallplate i...
TR-300314
Triax TMM 5x4 cascade multiswitch, to provide one satellite & terrestrial signal for up to 4 points. Also has satellite & terrestrial outputs to cascade on to another multiswitch. Diplex wallplate is ...
TR-300316
Triax TMM 5x6 cascade multiswitch, to provide one satellite & terrestrial signal for up to 6 points. Also has satellite & terrestrial outputs to cascade on to another multiswitch. Diplex wallplate is ...
TR-300317
Triax TMM 5x16 cascade multiswitch, to provide one satellite & terrestrial signal for up to 16 points. Also has satellite & terrestrial outputs to cascade on to another multiswitch. Diplex wallplate i...
TR-305301
Triax flat aluminium mounting plate, pre drilled with holes to hold up to 4 Triax TMM units. Allows much neater & easier installation of TMM equipment either directly to a wall or into a wall c...
TR-305302
Triax flat aluminium mounting plate, pre drilled with holes to hold up to 6 Triax TMM units. Allows much neater & easier installation of TMM equipment either directly to a wall or into a wall c...
TR-305303
Triax push on F-type link for neat & easy linking of Triax TMM equipment that is fixed to a TMM mounting plate.
...
TR-305305
Triax TMM satellite signal amplifier. For boosting sat signals fed from a quattro LNB or a cascaded signal from another TMM system in a remote location. Has independent gain controls for all four p...
TR-305306
Triax TMM Terrestrial amplifier. For boosting terrestrial television signals, both digital & analogue, before they are introduced unto a Triax TMM multiswitch system.
...
TR-305307
Triax TMM link lead for providing DC power between the cascadable TMM units. Up to six TMM units can be powered from one TMM power supply, these short leads are used to 'daisy chain' the power from on...
TR-305308
Triax TMM connecting lead, for linking TMM units together such as a TMM amplifier to a TMM multiswitch. Easy & neat installation....
TR-305309
Triax colour coded connecting leads for linking the colour coded quattro outputs of one multiswitch to the next.
...
TR-305310
Triax TMM power supply module. For powering up to 6 TMM modules. Please note the use of the TMM DC link lead is required to do this, available seperately (TR-305307)
...
TR-305311
Triax TMM power inserter. For providing power remotely to the input of a TMM multiswitch by introducing DC via the quattro satellite inputs
...
TR-305312
Triax TMM 5 input, 12 output cascascade multiswitch. For feeding a single satellite signal to up to twelve points.
...
TR-305314
Triax TMM 5 input, 4 output cascascade multiswitch. For feeding a single satellite signal to up to four points....
TR-305315
Triax TMM Terrestrial amplifier. For boosting terrestrial television signals, both digital & analogue, before they are introduced unto a Triax TMM multiswitch system.
...
TR-305317
Triax TMM 5 input, 12 output, end of cascascade line multiswitch. For feeding a single satellite signal to up to twelve points....
TR-305318
Triax TMM 5 input, 8 output cascascade multiswitch. For feeding a single satellite signal to up to eight points....
TR-305319
Triax TMM 5 in, 10 out splitter, for splitting the feed from a Quattro LNB & a terrestrial aerial to go to two multiswitches.
...
TR-305320
Triax TMM 5 in, 10 out splitter, for splitting the feed from a Quattro LNB & a terrestrial aerial to go to two multiswitches.
...
TR-305335
Triax TMM satellite signal amplifier. For boosting sat signals fed from a quattro LNB or a cascaded signal from another TMM system in a remote location. Has independent gain controls for all four pola...
TR-305393
Triax TMM 5 input, 4 output cascascade multiswitch. For feeding a single satellite signal to up to four points. Has independent gain control for all inputs.
...
TR-305394
Triax TMM 5x8 cascade multiswitch, to provide one satellite & terrestrial signal for up to 8 points. Also has satellite & terrestrial outputs to cascade on to another multiswitch. Diplex wa...
TR-305395
Triax TMM 5 input, 12 output cascascade multiswitch. For feeding a single satellite signal to up to twelve points. Has independent gain control for all inputs.
...
TR-305396
Triax TMM 5 input, 16 output cascascade multiswitch. For feeding a single satellite signal to up to sixteen points. Has independent gain control for all inputs.
...